Field notes
Fresh Air in a Tight New House: What a Builder Plans For
New homes are built tight to save energy, so fresh air has to be planned. What California requires, where the air goes wrong, and seven questions to ask your builder.
By Alik Konovalenko · · 6 min read
Updated
A tightly built home needs a planned way to bring in outdoor air. A whole-house ventilation system does that on purpose. Before the drawings are final, ask your builder where outdoor air will enter, how the kitchen and bathrooms will exhaust, where you can reach the filter and who will verify airflow after installation.
Older houses often exchanged air through gaps around windows, doors and framing. A well-sealed new home gives the design team more control over where air comes from and how much enters. That makes ventilation a design decision to settle before framing. The healthy-home planning checklist shows how it fits alongside moisture control, materials and handover checks.
Why a tight house needs a plan for air
The EPA says people spend about 90 percent of their time indoors. The same agency found levels of about a dozen common organic pollutants to be two to five times higher inside homes than outside. Paint, furniture, cleaning products, cooking and the people living there all add to the air, and in a tight house that air stays put unless something moves it.
The US Department of Energy puts it in two sentences. Airtight homes save a lot of energy, but pollutants can also accumulate. Whether new or existing, all energy-efficient homes need whole-house mechanical ventilation.
Mechanical ventilation means a fan, or a pair of fans, that moves a steady amount of air between the house and the outdoors on purpose. Opening a window is not a plan. It works on a mild day when someone remembers, and it does nothing at night, in August, or when the house is empty.
What California requires in a new home
California’s Energy Code treats fresh air as part of the design of the house, not something left to the owner. The 2025 edition took effect on 1 January 2026. For a newly built home, its compliance manual sets out, among other things:
- A whole-house ventilation system that brings in outdoor air year-round, whether or not anyone opens a window.
- A field test of that system’s airflow by an independent energy rater, with the result recorded.
- A MERV 13 or better filter on the outdoor air the system brings in.
- Exhaust fans in kitchens and bathrooms that vent to the outdoors, and a clothes dryer vented outdoors.
- Ventilation air drawn from outside, not from a garage, an attic, a crawl space or a neighboring unit.
The 2025 edition also revised the whole-house ventilation rates for single-family homes, so a house permitted this year is designed to different numbers than one permitted in 2024. Your builder’s energy consultant works those out for the specific house.
Four ways to bring air in
The Department of Energy describes four common whole-house systems. A new house will usually have one of them.
An exhaust system uses fans to push indoor air out, which pulls outdoor air in through a planned intake. It is the simplest and the cheapest. A supply system does the reverse: a fan brings outdoor air in and filters it on the way. A balanced system does both, moving equal amounts in and out. A heat recovery or energy recovery ventilator is a balanced system that passes the two air streams past each other, so most of the heating or cooling in the outgoing air is kept.
Each one can meet the code. They differ in cost, in how much energy they lose, and in how well they filter. The thing to know is which one your house has, where its intake is, and where its filter lives, because the filter is the part you will be living with.
Kitchens and bathrooms
Cooking is one of the biggest sources of pollution inside a house. The EPA lists gas stoves as a main indoor source of nitrogen dioxide, which irritates the eyes, nose, throat and lungs, and advises an exhaust fan vented outdoors over a gas stove.
California’s code asks more of a hood over a gas range than over an electric one. In a home over 1,500 square feet, a hood over an electric range must capture 50 percent of the cooking fumes or move 110 cubic feet of air a minute; over a gas range, 70 percent or 180. In smaller homes the numbers go up. A hood that only recirculates air through a charcoal filter and back into the kitchen does not meet the rule, however expensive it is.
Bathrooms are where moisture builds up fastest. A bath fan that runs on demand must move at least 50 cubic feet of air a minute, and the code also allows a smaller fan that runs all the time. Either way it has to vent outdoors. A fan ducted into the attic just moves the moisture somewhere you cannot see it, which is how the mold I wrote about gets started.
What you can notice in your own house
You do not need an instrument to notice that the air in a house is not moving. Water on the inside of windows on a cool morning is moisture the house could not get rid of. A bathroom mirror that stays fogged long after a shower is a fan that is too small, ducted nowhere, or not running long enough. A smell that is still there the next day, from cooking, paint or a closed room, is air that has not been replaced. None of these proves a problem on its own. Together they tell you to ask the questions below.
Seven questions to ask your builder
- Which whole-house ventilation system will the house have: exhaust, supply, balanced, or heat or energy recovery?
- Will the energy rater test and verify its airflow, and can I have a copy of the record?
- Is the range hood ducted outside, and is it sized for the kind of range we are installing?
- Do the bath fans run on a humidity sensor, a timer or continuously, and are they ducted outside?
- Where is the fresh-air intake, and is it away from the garage, the dryer vent and the other exhausts?
- What filter does the system take, where is it, and how often should it be changed?
- Is the clothes dryer vented outdoors?
A builder who plans the air will answer these in a minute. If the answers have to be looked up, that is worth knowing before framing, not after drywall.
The one thing to do this year
If you live in a house built in the last few years, find the ventilation filter and look at it. If you cannot find it, ask whoever built or services the house where it is. A filter that has never been changed, or a system nobody can locate, is the most common way a well-built house ends up with poor air. Everything else in this note starts from there.
Sources
- EPA: The Inside Story, A Guide to Indoor Air Quality
- EPA: Nitrogen Dioxide's Impact on Indoor Air Quality
- US Department of Energy: Whole-House Ventilation
- California Energy Commission: 2025 Single-Family Residential Compliance Manual (CEC-400-2025-005), Chapter 4
- California Energy Commission: 2025 Energy Code, single-family HVAC and ventilation